Leave Your Message
Products

Professional SS Hot Water Tank Manufacture Specialist

Buffer for air and ground source heat pumps heating/cooling systemsBuffer for air and ground source heat pumps heating/cooling systems
01

Buffer for air and ground source heat pumps heating/cooling systems

2024-09-20

50L – 1000L

 

SST manufactures a large range of stainless buffer tanks with different coil configurations.


Heating Systems: In heating systems, a buffer tank stores excess hot water produced by a boiler or heat pump. This helps to prevent short cycling of the heating equipment, which can lead to inefficiencies and wear.


Cooling Systems: In chilled water systems, a buffer tank stores cold water to ensure consistent cooling, compensating for fluctuations in cooling demand.

view detail
OEM Hot Water Tank for Heat PumpOEM Hot Water Tank for Heat Pump
01

OEM Hot Water Tank for Heat Pump

2024-09-20

200L – 500L

 

The tank is an essential component for the functioning of a heat pump. The Direct model without coils can be used as a storage or buffer tank. While the Indirect 2 Coil model, which is manufactured with two spiral fixed coils, provides an efficient water heating and storage solution.

view detail
Combined Tank For Heat Pump - DHW & Certral Heating BufferCombined Tank For Heat Pump - DHW & Certral Heating Buffer
01

Combined Tank For Heat Pump - DHW & Certral Heating Buffer

2024-09-20

200L – 500L

 

The complete solution is the combination of a sanitary water tank and a central heating buffer, working with heat pump, solar panels and gas boiler.
The great advantage is saving installation space, transport and labour costs. 
The highest energy efficiency level of SST water heaters can reach the EU Energy Efficiency A+ Level, which ensures that users can get a better experience at a lower cost.

view detail
Storage tank for commercial with heat exchanger up to 5000LStorage tank for commercial with heat exchanger up to 5000L
01

Storage tank for commercial with heat exchanger up to 5000L

2024-09-20

800L - 5000L

 

--High build quality with high grade materials and tried and tested components;
--Manufactured from 'Duplex' stainless steel for superior corrosion resistance;
--Features high performance 35mm smooth heat exchanger connecting to a boiler as a primary heat source;
--Front entry 3Kw electric immersion heater for backup heating;
--Available in capacities from 50 to 5000 litres
--WATERMARK & SAA approved

view detail
Vertical Duplex Stainless Steel Buffer For Gas BoilerVertical Duplex Stainless Steel Buffer For Gas Boiler
01

Vertical Duplex Stainless Steel Buffer For Gas Boiler

2024-09-20

30L – 500L

 

SST specialise in the supply of Standard and Bespoke Buffers and tanks into renewable energy systems such as heat pumps and solar thermal. Buffer tanks are primarily used to store heat when demand is low and supplement a system when demand for heat is high.

SST Buffer tanks are manufactured in accordance with ISO 9001 and are CE &Watermark marked when applicable.
The range of SST Buffer tanks can be tailored to suit a customers needs such as number of connections and connection type and size. Flanged or threaded connections can be offered although Bespoke solutuions may take a little longer to be delivered.
SST supply the full range range of standard Buffer tanks from 50 - 2000 litres.

view detail
Stainless Steel Cylinder For Solar SystemStainless Steel Cylinder For Solar System
01

Stainless Steel Cylinder For Solar System

2024-09-20

200L – 500L

 

A solar hot water system is a technology that uses energy from the sun to heat water for domestic, commercial, or industrial use. This system is an eco-friendly alternative to conventional water heating methods, such as electric or gas heaters, as it significantly reduces energy consumption and carbon emissions.

view detail
Duplex stainless steel water cylinder with double coilDuplex stainless steel water cylinder with double coil
01

Duplex stainless steel water cylinder with double coil

2024-09-25

200L – 1000L

 

SST Stainless Steel cylinders are manufactured from Duplex 2205 stainless steel to EN 1.4462, ASTM S3 2205/S31803 (with PRE value of 35). 
√This Ferritic-Austenitic steel combines high strength, excellent corrosion resistance, stress corrosion cracking resistance and pitting resistance. √Available in one ,two or three spiral and smooth heat exchanger with capacities from  30litre to 2000 litres. √High-performance coils - Can recover from cold in under 60 minutes √Manufactured from Duplex 2205 stainless steel - Increased durability  √Fully insulated with 45-65mm of CFC  environmentally friendly polyurethane foam - Reduced heat loss and pollution, lower fuel bills √Meets EU environmental legislation and regulation standards - Includes CE & ErP of A+ 

view detail
Wall-mounted electric water heater with 1.5kw or 3kwWall-mounted electric water heater with 1.5kw or 3kw
01

Wall-mounted electric water heater with 1.5kw or 3kw

2024-09-25

30L – 300L

 

√The working principle of the SST energy storage tank is an energy-saving hot water tank. The inside of the water tank is insulated to retain heat. In this way, you can store hot water for use in your projects while reducing energy losses.
√The SST energy storage tank can be connected to various hot water systems, such as heat pumps or solar thermal systems.
√ Safe fluorine-free polyurethane foam insulation material
√Withstands pressures up to 10 bar.
√ High-quality materials, durable.
√CE, ERP, WATERMARK, ROHS certified
√Can be installed indoor and outdoor.
√The electric heating element can be used as a back-up heater, additional heating to increase capacity or as legionella protection (external control).

view detail
Horizontal DHW tank for solar/heat pump/gas boilerHorizontal DHW tank for solar/heat pump/gas boiler
01

Horizontal DHW tank for solar/heat pump/gas boiler

2024-09-25

50L – 500L

 

SST tanks are extremely flexible and can utilize a variety of energy sources to maximize the efficiency of hot water production. SST tanks are suitable for most renewable energy combinations (solar ≤ 12m2 / heat pump ≤ 5kW) and high temperature heat sources (gas or biofuel boilers up to 25kW). The electric heating element can be used as a back-up heater, additional heating to increase capacity or as legionella protection (external control).

view detail
SST 25L Stainless steel Buffer tankSST 25L Stainless steel Buffer tank
01

SST 25L Stainless steel Buffer tank

2024-12-06

25L

The SST 25L SUS304 Buffer Tank is an essential solution for efficient hot water management in residential and commercial applications. Constructed from high-quality SUS304 stainless steel, this buffer tank offers exceptional durability, corrosion resistance, and longevity, making it ideal for varied water heating systems.

view detail
50L Heat Pump Buffer tank50L Heat Pump Buffer tank
01

50L Heat Pump Buffer tank

2024-12-06

50L

Designed to enhance the performance of your heating system, the 50L buffer tank acts as a thermal reservoir, storing excess hot water produced by your heat source. This ensures a consistent supply of hot water for immediate use while minimizing energy consumption. With its compact size, the tank can be easily integrated into existing systems without requiring extensive modifications.

view detail